Suzhou anti-static clothing: the maintenance behind the anti-static clothing is more important.
In the current production and life, anti-static clothing is not limited to the electronics industry, and is widely used in other industries, such as: petrochemical industry, chemical industry, mining and metallurgy industry, special industry. The production process of anti-static clothing is relatively complicated, and the selection and production process of raw materials are very demanding. Therefore, professional maintenance of the produced anti-static clothing is required to better play the role of anti-static clothing.
In transportation, it should be noted that the anti-static overalls must have coverings on the top, and must not damage the packaging to prevent sun exposure and high temperature contact. It is strictly prohibited to drag by hand hook during handling. Work clothes should be stored in a dry and ventilated warehouse to prevent mildew and deterioration. When storing, leave the ground and the wall more than 200mm, and leave all heating elements more than 1m. Avoid direct sunlight and do not allow it to be placed in the open air. Anti-static wool knitted fabrics must be packed with an appropriate amount of anti-caries agent during storage and storage.
Anti-static clothing should be cleaned with a neutral detergent. Do not mix with other clothes during washing. Use hand-washing or washing machine soft-washing procedure to avoid breakage of conductive fibers. The washing water temperature should be below 40 ° C, and rinse with normal temperature water. The washing time is as short as possible, but it must be thoroughly rinsed to remove residual detergent. Workwear with both flame retardant and oil-repellent properties. Do not use bleach or organic solvents to decontaminate.
In the production process, the biggest threat in the clean room is the pollution caused by personnel activities, mainly including active dust particles, such as bacteria; non-reactive dust particles, such as hair, dander, etc.; chemical substances: such as sodium, potassium, chloride and magnesium Wait. The most effective way to solve this problem is to capture and take away the dust particles through the clean and clean clothing, so that the pollutants are not scattered into the clean room environment, so as to reduce the pollution of the clean room environment. The cleaning management of clean clothes plays an important role in the pollution control of clean rooms.
However, some factory employees clean themselves, so that the clean clothes after cleaning in the ordinary environment are clean on the surface, but in fact, the dust-free clothes have already attached dust and bacteria, and are protected by water and detergent. Secondary pollution. There is also the ordinary cleaning method, if used improperly, it will cause direct or indirect damage, which will not only affect the performance of the use, but also seriously affect its life. Therefore, cleaning of clean overalls must use a special cleaning method - dust-free isolation cleaning.
Clean and clean clothing strictly comply with IEST-RP-CC003 clothing system, and should be cleaned in standard 1000 or higher dust-free workshops. Cleaning the clean work clothes with deionized ultrapure water and non-ionic surface active detergent of more than 18 megohms, and finishing in the drying equipment with high-efficiency filtration system, folding and packaging of the clean clothes after cleaning , inspection and temporary storage are all done in an ultra-clean environment. Only by scientific and professional methods can we maintain the long-term durability of clean clothes and ensure the stability of clean clothes.
Service Hotline:18952406303
URL:ssl-https.cn
address:Room 101, 1st Floor, Phase III, Suzhou SEG Electronics Market, Binhe Road, Suzhou High-tech Zone